Checking that the RTI (Road Traffic Information) Screen Closes

Checking that the RTI (road traffic information) screen closes

Checking the component
Check that nothing is preventing the screen from closing.
Check fuse no. 18 in the integrated relay / fusebox in the passenger compartment.
Check the cable between the display screen terminal #J18 and control module terminal #C12. Check for a short-circuit to supply voltage. Check for a short-circuit to ground. Check for an open-circuit.
Remedy as necessary.

Other information:
- To access and replace the display screen, see Display screen / loudspeaker, RTI (road traffic information), replacing Service and Repair
- To program and access or replace the RTI (road traffic information) control module, see Road traffic information module (RTI), replacing Road Traffic Information Module (RTI), Replacing
- To connect the breakout box, see Connecting the breakout box to the Road Traffic Information (RTI) control module Connecting the Breakout Box to the Road Traffic Information (RTI) Control Module
- For information about signals and connectors, see Signal specification, RTI Signal Specification and Signal specification, RTI Signal Specification
- Checking wiring and terminals Checking Wiring And Terminals









Was a fault detected?

Yes - FAULT FOUND

No - Replacing the component

-------------------------------------------------

Replacing the component
Try replacing the display screen.
Ignition on.
Deploy and close the screen using the RTI (road traffic information) switch on the steering wheel or with the remote control.

Other information:
- To access and replace the display screen, see Display screen / loudspeaker, RTI (road traffic information), replacing Service and Repair.

Does the screen deploy and close correctly?

Yes - FAULT FOUND

No - No Fault Found

-------------------------------------------------