Interior Lighting, Replacing

Interior lighting, replacing

Removal and Installation

Removing the handle (rear)




Remove the covers.
Remove the two screws and release the handle by pulling it straight out.

Removing reading lamps (rear)




Release part of the weatherstrip from the rear door arch.
Pull the headlining downwards. Press in the protruding edges (A) and remove the lamp from the headlining.
Disconnect the connector.

Installing reading lamps (rear)




Connect the connector. Install the lamps and the cover in the headlining.
Check that the parts are correctly aligned with the protruding edges.
Reinstall the headlining. Install the weatherstrip in the rear door arch.
Check that the lamps function.

Installing the handle (rear)




Position the handle (check the pin) and screw in the screws.
Install the covers.
On the driver's side: make holes for the plugs.