Replacing Variable Valve Timing (VVT) Control Valve
Replacing the variable valve timing (VVT) control valve
Preparations
Remove:
- the upper timing cover.
Remove the valve housing assembly
Remove:
- the connector
- the screws
- the valve
- the gasket.
Note! Clean the area around the variable valve timing (VVT) valve thoroughly to avoid contaminated oil entering the ducts / the variable valve timing (VVT) valve.
Install the valve housing assembly
Install:
- a new gasket
- the valve
- the screws. Tighten to 10 Nm
- the connector
- the upper timing cover.