Rear View Mirror

The inner rear view mirror

Removing the rear view mirror and holder




- Press the mirror backwards and out through the holder.

Note! Press the holder as close to the window as possible.

Installing holders

Warning! Use protective goggles and protective gloves.In the event of splashes in the eyes: Rinse using running water for 15 minutes. Consult a doctor.May irritate sensitive skin. Rinse immediately using water.Contents: Acrylic acid and metacrylic acid.

Remove the adhesive residue from the window and holder.
Mark the position for the holder.
Apply a thin layer of adhesive P/N 1161481.
Install the net film.
Allow the adhesive to dry for 15 minutes before installing the holder.
Bond the mounting to the holder.
Allow to cure for approximately 12 hours.

Installing the mirror
Install the mirror in the holder. Press forward until the mirror secures.