Outer Door Mirror Components

Outer door mirror components

Removing the mirror glass




Press in the mirror glass at (A) as far as possible on one side.
Pull the glass out through the mounting by lifting the mounting pins.
Carefully remove the connector from the mirror glass.

Installing the mirror glass
Connect the connector.
Carefully press the mirror glass into place so that it locks into position.

Note! Ensure that the pins are inserted into the holes.

Ensure that the cable harness is correctly positioned.
Check the function.

Removing the cover





Remove:
- the mirror glass according to Removing the mirror glass
- four screws
- the surround (A).
Press in the four lugs (B). Remove the cover (C).

Installing the cover

Install:
- the cover (C). Press the cover until the lugs fasten
- the surround (B)
- the four screws for the surround
- the mirror glass according to Installing the mirror glass.

Removing the control motor and mounting





Remove:
- the mirror glass according to Removing the mirror glass
- the three screws
- the control motor and mounting from the cover
- the connector.

Installing the control motor and mounting

Install:
- the connector
- the control motor and mounting
- the three screws
- the mirror glass according to Installing the mirror glass.
Check the function.