Outer Door Mirror Components

Outer Door Mirror Components

Removing the mirror glass







- Press in the mirror glass at (A) as far as possible on one side.
- Pull the glass out through the mounting by lifting the mounting pins.
- Carefully remove the connector from the mirror glass.

Installing the mirror glass

- Connect the connector.
- Carefully press the mirror glass into place so that it locks into position.

NOTE: Ensure that the pins are inserted into the holes.

- Ensure that the cable harness is correctly positioned.
- Check the function.

Removing the cover







Remove:
- the mirror glass according to (V52K10).
- four screws.
- the surround (A).

- Press in the four lugs (B). Remove the cover (C).

Installing the cover

Install:
- the cover (C). Press the cover until the lugs fasten.
- the surround (B).
- the four screws for the surround.
- the mirror glass according to (V52K20).

Removing the control motor and mounting







Remove:
- the mirror glass according to (V52K10).
- the three screws.
- the control motor and mounting from the cover.
- the connector.

Installing the control motor and mounting

Install:
- the connector.
- the control motor and mounting.
- the three screws.
- the mirror glass according to (V52K20).

- Check the function.