Transferring Dashboard Components

Transferring Dashboard Components

Replacing the dashboard

NOTE: The side ventilation vents are supplied together with the dashboard.

Transferring components to a new dashboard:







- Place the dashboard on a piece of cloth with the rear facing upwards.
- Transfer the distributor pipe (four screws). Disconnect the cable harness for the SRS from the dashboard.

Transfer:
- the glove compartment (two screws) and bulbs.
- the central ventilation vent.
- the vent on the driver's side.
- the vent on the passenger side.
- the air bag unit (two screws).
- the steel nuts.
- the mounting sleeve in the middle.
- the cable harness for the dashboard.
- all the foam filling to the same place on the new dashboard.

- Tighten the screws for the SRS air bag. Tighten to 9 Nm.
- Install the dashboard according to Installing the dashboard.