Connecting the Breakout Box

Connecting the Breakout Box (CEM)








Special tools:
951 1511
951 1428
951 1499

Connecting the breakout box

- Ignition off.
- Release the central electronic module (CEM).
- Disconnect the four control module connectors.

Connect adapter 951 1511 (26-18-16-12 pin) to the control module connectors and connect breakout box 951 1428 and wiring 951 1499 to the adapter.

Disconnect the breakout box in reverse order.

Other information:

- To access / replace the central electronic module (CEM), Refer to: "Accessories and Optional Equipment : Central Control Module : Service and Repair" Service and Repair