Initiate the Immobilizer Control Module.
Initiate the immobilizer control module
Information
This function is used when a defective control module has been replaced. During initialization, software is downloaded into the control module first. The key codes for all keys are then programmed in.
Model year 2003-: For cars with an integrated ignition key / remote control
The head of the integrated ignition key / remote control ( see illustration) contains functions for both the immobilizer and the remote control. This means that for a new unprogrammedignition key / remote control both the immobilizer control module and VGLA control module must be programmed with the functions for the immobilizer and remote control. After this procedure, order the software package to program the remote control. However the immobilizer control module is still limited to storing a maximum of six keys. The VGLA control module is restricted to three remote controls.
Do you want to continue initializing the immobilizer control module?
Yes - Ordering software / keys
No - DONE
-------------------------------------------------
Ordering software / keys
Note! Software and keys must be ordered before the immobilizer control module can be initialized.
Order software and keys for the S/V 40according to9139881.
For engine B4184SJ with Melco 2 engine control module (ECM)
Order the software and keys according to30620776.
Select Continue.
Continue - Initialize the control module
-------------------------------------------------
Initialize the control module
Note! Programming / initialization can be carried out when the keys and / or software have been delivered.
Program / initialize the control module for the S/V 40according to9139881.
For engine B4184SJ with Melco 2 engine control module (ECM)
Program / initialize the control module according to30620776.
Check in VIDA vehicle communication that no diagnostic trouble codes (DTCs) have been stored during the process.
Select Continue.
Continue - DONE
-------------------------------------------------