Faulty Signal

Faulty signal

Compare the serial number on the control module with the table. Check that the number corresponds to the car.
SRS serial number
AABBBCCCCD Ten symbols in total
Replace the control module if the serial number is not correct.






Other information
- To access / replace the control module, see Sensor module, replacement Service and Repair.





Select "Continue" when the fault has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After carrying out the repair, check that the fault has been remedied.




- Ignition off
- Disconnect the battery negative lead
- Reinstall the connectors, components etc.
- Ignition on
- Connect the battery negative lead.

Warning! There must not be anyone inside the passenger compartment when the battery is connected.

- Read off diagnostic trouble codes (DTCs).
The fault is no longer present if the status of the diagnostic trouble code (DTC) has changed to intermittent.





Does the status change?

Yes - VERIFIED

No - VERIFICATION FAILEDPAPER

------------------------

VERIFICATION FAILED - ???

VERIFIED - FAULT FOUND

-------------------------------------------------