Initiation Fault

Initiation fault

IMM-122 Control module

Initiating immobilizer control module




- Ignition on.
- Initiate immobilizer control module according to Immobilizer control module, initiating Immobilizer Control Module, Initiating.
- Switch the ignition off and on.
Read off diagnostic trouble codes (DTCs).





Is diagnostic trouble code (DTC) IMM-122 erased?

Yes - Fault-tracing information

No - Try to initiate again

-------------------------------------------------

Fault-tracing information
The control module is initiated.

Select Continue.

Continue - Verification

-------------------------------------------------

Try to initiate again




- The immobilizer control module has not been initiated.
- Try to initiate the immobilizer control module again according to Immobilizer control module, initiating Immobilizer Control Module, Initiating.
- Switch the ignition off and on.
Read off diagnostic trouble codes (DTCs).





Is diagnostic trouble code (DTC) IMM-122 erased?

Yes - Fault-tracing information

No - Replacing the component

-------------------------------------------------

Replacing the component
The immobilizer control module cannot be initiated. Try a new control module according to Immobilizer control module Immobilizer Control Module.
Initiate the immobilizer control module according to Immobilizer control module, initiating Immobilizer Control Module, Initiating.

Select Continue when the fault has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification

Verification





Hint: Check that the repair has been verified and that the fault has been remedied as follows.

Does the car start with all keys?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFICATION FAILED - Fault-tracing information

VERIFIED - FAULT FOUND

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Initiating immobilizer control module

-------------------------------------------------