Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
At engine startup the control module checks that the camshaft is in the correct position in relation to the crankshaft. Diagnostic trouble code (DTC) ECM-62 is stored if the control module detects the camshaft in an incorrect position on start up.

Substitute value
None.

Possible source
- Camshaft cogs incorrectly seated
- Incorrectly installed camshaft pulley
- Contact resistance in the terminals.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit
- The engine misfires.