Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Signal Too High. Intermittent Fault






Signal too high. Intermittent fault

Checking components and wiring
Check that the resistance between turbocharger (TC) control valve terminals 1 and 2 is approximately 30 ohms at +20°C.
Check the signal cable between engine control module (ECM) terminal 5 and turbocharger (TC) control valve terminal 2 for an intermittent short-circuit to supply voltage. Remedy according to Checking wiring and terminals. Intermittent faults Checking Wiring And Terminals. Intermittent Faults.

Other information
- To connect the breakout box, see Connecting the breakout box. EMS 2000 Connecting The Breakout Box. EMS 2000.













Select Continue.

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking components and wiring

FAULT FOUND - DONE

-------------------------------------------------