EEPROM Memory Fault

EEPROM memory fault

Checking the DSA control module




- Ignition off.
- Start the engine.
- Read off diagnostic trouble codes (DTCs).
Check whether diagnostic trouble code (DTC) DSA-112 is still stored.





Is diagnostic trouble code (DTC) DSA-112 still stored?

Yes - EEPROM memory fault. Permanent fault

No - EEPROM memory fault. Intermittent fault
No Fault Found

-------------------------------------------------

EEPROM memory fault. Permanent fault
Try a new DSA control module according to DSA control module, replacement Service and Repair.





Select "Continue" when the fault has been remedied.

Continue - FAULT FOUND

-------------------------------------------------

EEPROM memory fault. Intermittent fault





EEPROM memory fault. Intermittent fault

EEPROM memory fault. Intermittent fault
The DSA control module is OK.




- Erase the diagnostic trouble codes (DTC).

Select Continue.

Continue - Fault-tracing information

------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Attempt New Test

FAULT FOUND - FAULT FOUND

DONE - DONE

-------------------------------------------------

Attempt New Test - Checking the DSA control module

FAULT FOUND - FAULT FOUND

DONE - DONE

-------------------------------------------------