Connecting the Breakout Box

Connecting The Breakout Box







- Ignition off.
- Expose the combined instrument panel.
- Disconnect the connector from the combined instrument panel.

On the combined instrument panel connector check that:
- The male and female terminals are undamaged and properly attached (cannot be pressed in).
- The wiring for the female terminals is securely connected.
- In particular check those terminals that are relevant to the stored diagnostic trouble code (DTC) / symptoms.
- Connect adapter 951 1372 to the combined instrument panel connectors A and B (wiring side). Connect breakout box 981 3190 to the adapter.




After performing this procedure Checking the Ground Terminal