Internal Fault

Internal fault

Status check
Check the internal circuits of the combined instrument panel using VIDA.





Does the test display that the internal circuits of the combined instrument panel are NOT OK?

Yes - Replacing the combined instrument panel

No - Information

-------------------------------------------------

Replacing the combined instrument panel
To access / replace the combined instrument panel, see Driver information module (DIM), installation/removal, component replacement Driver Information Module (DIM), Installation/Removal, Component Replacement.





Select Continue.

Continue - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After carrying out the repair, check that the fault has been remedied.




- Ignition off.
- Reinstall the connectors, components etc.
- Check the internal circuits of the combined instrument panel using VIDA.





Does the test display that the internal circuits of the combined instrument panel are OK?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Replacing the combined instrument panel

-------------------------------------------------

Information
The combined instrument panel has previously registered an internal fault but has detected that the fault is no longer present.





Select Continue.

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Information

FAULT FOUND - DONE

DONE - DONE

-------------------------------------------------