ECC-411

Diagnostic Trouble Code (DTC) Information

Condition







Diagnostic trouble code (DTC) ECC-411 is stored if the control signal is missing or is faulty.

Condition

- The ECC control module attempts to compensate with a pre-set substitute value via a control signal to the power unit. This substitute value is lower than the maximum value. If the blower fan switch is in position 0, no control signal is transmitted.

Possible source

- Fault in blower fan power unit.
- Open-circuit in the cable between the ECC control module and the blower fan power unit.
- Fault in blower fan motor.

Condition

- Driver fault warning. The LEDs beside the A/C and REC switches flash for approximately 20 seconds.
- The blower fan motor does not react when the blower fan switch is set to different manual positions (positions 1 to 4).