Seat Frame, Modifying

Seat frame, modifying

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Modifying slide rails




When installing new slide rails these may have to be modified.
If the old slide rails do not have nut pieces, these shall be tapped out from the new slide rails according to the illustration.

Installing new height adjuster on old rails




Fit the washer, 1 pc., with part number955895between the slide rail and motor on the screws.




Fit the nuts with part number971095and tighten with 20 Nm.