Connecting the Volvo Scan Tool

- Ignition OFF.
- Install memory cassette.
- Connect Volvo Scan Tool (ST) to data link connector (DLC) using adapter.
- Ignition ON.
- Turn on power to the Volvo Scan Tool (ST).
- Select language, car and function group.
- Select required system.
- Select LEFT or RIGHT SEAT.
- Select DIAGNOS TEST to read out and erase diagnostic trouble codes (DTCs), counters and frozen values and for activating components/functions.
- Select MONITOR TEST and SCROLLING LIST to read off the control module input and output signals.
- Select CM ID to read off the part number of the control module.

Refer to DTC Table. Diagnostic Trouble Code Descriptions