Faulty Signal. Intermittent Fault

Checking Cables and Terminals
- Check cable between connector 24/15 terminal 9 and air conditioning (A/C) compressor for an intermittent open-circuit and an intermittent short-circuit to ground.
- Check air conditioning system and perform fault-tracing.
- Proceed to: Fault-tracing Information section below.

Fault-tracing Information
For intermittent faults, fault-tracing is not followed by a verification because the fault is not present at this moment.

- Do you want to repeat fault-tracing?

Yes:
^ Proceed to: Checking Cables and Terminals section above.

No:
^ Operation done.