Trouble Code Conditions

Special Tools:
- 998 8686





Trouble Code Conditions
- Lock-up solenoid SL controls the transmission lock-up function. Solenoid SL operates when it receives battery voltage from the transmission control module (TCM) and is activated during different driving conditions depending on road speed, throttle position and the driving mode selected. Diagnostic trouble code (DTC) AT-332 is stored if the transmission control module registers an open-circuit in the solenoid SL circuit when the solenoid should not be activated. Solenoid SL cannot be activated.
- Diagnostic trouble code AT-332 is also stored if the transmission control module registers a short-circuit in the solenoid SL amplifier when this should not be activated. Solenoid SL cannot then be activated.

Substitute value(s)
- The transmission control module "Emergency mode I" program has been initiated.

Possible source(s)
- Open-circuit in signal cable.
- Defective solenoid.
- Open-circuit in power ground.
- Contact resistance in terminals.
- Defective transmission control module.

Fault symptom(s)
- No lock-up function.
- No adaption of the gear slippage times at high altitude (High Altitude Compensation).
- Start fault-tracing. Open-Circuit