DTC EFI-444

4-4-4 ACCELEROMETER SIGNAL





Trouble Code Condition(s)
- If the engine control module (ECM) senses that the DC signal from the accelerometer has changed its mean setting (2.5 Volts) to more than 3.5 Volts or less than 1.5 Volts, diagnostic trouble code (DTC) EFI-444 is stored.

Substitute value(s)
- None.

Possible source(s)
Signal too high:
- Short-circuit to supply voltage in signal cable.
- Open-circuit in signal cable, ground lead or power cable.
- Short-circuit to ground or supply voltage in power cable.
- Contact resistance in terminals.
- Defective accelerometer.

Signal too low:
- Short-circuit to ground in signal cable.
- Defective accelerometer.

Fault symptom(s)
- Can store misfire diagnostic trouble codes when travelling on an uneven road.