Installation of Rear Window Outer Strip

8





Start by installing strip in lower rear corner. Outer and inner strips must fit with each other.

Check strip fits correctly with body and window opening.

Remove one piece of protective tape at a time from lower rear corner of new Strip and press strip firmly in place.

Continue by installing upper front corner strip and finish with lower part of window opening.

Check Strip fits correctly with body and window opening.

Note!
Make sure there is a straight line along body.

Caution!
It is important that pressure is applied to strip to ensure tape makes full contact with body.

Remove one piece of protective tape at a time from remaining part of new strip and press Strip firmly in place.

Install rear window in reverse order, as described in 6.