Replacing Gear Selector Diode Bridge, Top Panel/Boot
Preparations1
Removing cover, center console storage compartment and boot
Remove:
- cover and center console storage compartment screws
- center console storage compartment
- lighting from rear ashtray holder, not illustrated
- boot from parking brake lever
- cover under parking brake lever
2
Removing data link connector (DLC) and center console components
Fold up the data link connector (DLC) cover. Remove the data link connector (DLC) from the center console.
Pull out the lower edge of the soundproofing panels on both sides.
Remove front center console screws on both sides.
3
Removing center console
Pull parking brake lever up as far as possible
Pull the center console backwards a little. Remove the top panel from the center console. Disconnect any switches from the center console.
Note!
To install center console, see step 10.