AA. Driving Mode Selector, Replacement

AA. Driving mode selector, replacement

AA1

Remove the battery negative lead.

Remove the mode selector.







The mode selector is fastened to the panel in the central console with a snap fastener. Detach the mode selector carefully by inserting a screwdriver in carefully between the panel and the mode selector.

Remove the connector from the mode selector.




AA2

Connect the connector to the new mode selector.


Reinstall the mode selector in the panel.

Re-connect the battery negative lead and erase any diagnostic trouble codes DTC.

See section On-board Diagnostic Systems, Diagnostic Test Mode l. Testing and Inspection