Removal of Lock From Door and Disassembly of Lock.
AREMOVAL OF LOCK FROM DOOR
- Remove lock from door as described in the service manual:
TP 8201201
Section 8 (82-86, 88)
Interior, exterior, page 19
850- 1993-
DISASSEMBLY OF LOCK
- Cut clamp (A) holding the cables to the housing
- Remove tape sections (B) retaining the cables.
- Turn protective cover (C) facing down, remove locking catches in the cover's inner retaining pins using a screwdriver, and save the catches (see illustration). Break the cover carefully away from the lock actuator arm mounting (D).
Care is required in this operation so that the cables and cover are not damaged.