Fuel Distribution Manifold - Torque
GROUP23
No.
811
DATE
10/93
TIGHTENING TORQUE FOR FUEL DISTRIBUTION MANIFOLD 850
REFERENCE: TP 32379/2 (ENGLISH); 4/93; LH 3.2 MFI/EZ-129K DI ENGINE MANAGEMENT SYSTEMS
TP 31910/2 (ENGLISH); 6/92; B5204, B5254 ENGINES
Tightening torque for fuel distribution manifold
During service or repair to the fuel distribution manifold, replace bolts, p/n 969339-1, if they are loosened or removed.
Note:
Do not re-use bolts. Always use new bolts when fitting.
The correct torque for the fuel distribution manifold bolt is 10 Nm (7.5 ft lbs). On pages 264 & 266 of TP 32379/2, cross-out the reference to +75°. On page 62 of TP 31910/2, procedure J4, "Tighten fuel distribution manifold" and on page 75, procedure Q5,"Install fuel distribution manifold", add 10 Nm (7.5 ft lbs).