Readouts With Volvo Scan Tool (Diagnostic Key) [CC]

Connecting

- Switch ignition off.





- Insert the appropriate memory module for the model concerned in the ST (Diagnostic Key).

- Connect the interface cable to the DLC.

- Switch ignition on.

- Use the buttons marked * and cursor keys to call up "ABS-800" in the display window.

The procedure for using each DTM in conjunction with the ST (Diagnostic Key) is shown on the following pages as menus using the following symbols:





Text in display:

Light circle = quick press on * key, downwards in sequence.

Bold circle = long press on * key, upwards in sequence. Use the cursor keys to scroll text up or down in the display, horizontally in the flowchart.

For more details, see ST (Diagnostic Key) manual.

Reading Off Diagnostic Trouble Codes (DTCS)





Connect ST (Diagnostic Key) and follow instructions in display window. See flowchart.

Erasing Diagnostic Trouble Codes (DTCs)





Connect ST (Diagnostic Key) and follow instructions in display window. See flowchart.

Exiting Diagnostic Test Mode (DTM)

- Switch ignition off.

- Start car and drive at at least 40 km/h (25 mph).

- ABS warning indicator should go out.

- If ABS warning indicator does not go out, see if new DTCs have been posted.

DTM 4

Access:





Connect ST (Diagnostic Key) and follow instructions in display window. See flowchart.