Reassembly of Lock and Reinstallation In Door

F

REASSEMBLY OF LOCK AND INSTALLATION OF LOCK IN DOOR.

REINSTALL:




- protective cover (A) by pressing cover into place carefully around the lock's actuator arm mounting (B) so that the mounting flange locks the cover securely. Care is required in this operation so that the cables are not damaged.

- locking catches in the cover mounting pins (see inset illustration).

INSTALL:

- a new clamp (C) to fasten the cables.

- new woven tape sections (D) to secure the cables.

REINSTALL:

- lock in the door according to method described in the service manual:

TP 8201201
Section 8 (82-86, 88)
Interior, exterior
850

Verify lock functions.