Intermittent Fault [EG10]

Intermittent Fault

Check leads and terminals





- Check hydraulic unit connector C/ED and control module connector for loose contact as per HA5 and contact resistance and oxidation as per HA6 Checking Leads and Connections [HA]

NOTE: Check particularly carefully that connector C/ED is connected correctly and that pin and sleeves are free from damage, are firmly in place and making good contact. This applies particularly to the pin and sleeves for the DTC concerned.

- Check lead between hydraulic unit valve block and control module for intermittent short-circuit to ground as per HA3 and intermittent short-circuit to supply as per HA4. Checking Leads and Connections [HA]