General DTC Information

Diagnostic Trouble Code (DTC) Information

Conditions for DTC





If solenoid valve circuit in hydraulic unit is short-circuited to ground/supply or if there is an open circuit in the circuit, the control module will interpret this as a fault and post a DTC for the valve concerned.

Substitute value
- ABS / TRACS cut out.

Sources of fault
- Signal lead short-circuited to ground or supply.
- Open circuit in signal lead.
- Faulty solenoid valve (hydraulic unit).
- Contact resistance in terminals.

Symptoms
- None.

Start fault-tracing at EG1 Check Status [EG1]