Engine Wiring Harness/New Dash Harness - Modification
SECTION3
GROUP
37
NO.
809
DATE
Feb, 1996
Modification of engine compartment wire harness when replacing dashboard wire harness
800, 1993
REFERENCE:
TP 3501201, SECTION 3 (35-38), LIGHTING, INSTRUMENTS AND OTHER ELECTRICAL COMPONENTS; 850 1992-
Modification of engine compartment wire harness when replacing dashboard wire harness
The original dashboard wire harness, P/N 6849469-9, used in 850 M/Y 1993, has been superseded by P/N 9142094-3.
The change occurred at the following chassis numbers:
Car model: Factory code: Chassis nos.:
854 2 100496
855 2 012016
Only the new dashboard wire harness, P/N 9142094-3, is available as a replacement part.
When replacing the original dashboard wire harness to the new one, the engine compartment harness must be modified in order to have radio function in ignition position I and II.
The tools and materials necessary to this Service Bulletin are included in terminal repair kit 9814235-9.
Methods for removal, installation and crimping of wire terminals are described in Service Manual Section 3 (37)
Wiring repairs and replacement of cable terminals
850, 900
A1
Modification
- Find connector 2412 (white) on the engine compartment wire harness.
- Remove the red-black wire in position 3, use tool 9814229-2.
A2
- Connect wire to position 10 on connector 24/13 (red).
A3
Due to the new wire routing, the wire is approx. 100 mm (4") longer than the old routing.
- Tape the excess to the wire harness.
A4
The existing 14 pin adapter harness must be taped back and out of the way to prevent rattles.
WARRANTY STATEMENT: Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01
Operation No. Labor description Time allowance
37908-3 Modification of engine wire harness 0.2 hrs