Replacement of Left-Hand Headlamp Wiper Motor

A1






Remove connector (1) from front panel (undo two screws).

Tuck connector under battery shelf Remove clip and open connector (2).


A2





Disconnect washer hose from wiper arm. Remove:

- wiper arm
- trim under headlamp
- wiper motor retaining screws (two)


A3





Remove wiper motor. Install new motor.

Reinstall components in reverse order.

Note:
Before mounting the wiper arm, check that the motor is in the self-parked position and that the washer hose is not pinched.


The wiper blade must be positioned on the top when tightening.

Check operation.