Throttle Cable/Linkage: Adjustments

Remove Throttle Body
- Remove throttle body from intake manifold.
- Remove throttle switch from throttle body.

Clean and Adjust
- Clean throttle body.
- Check and adjust throttle valve centering in throttle valve housing.
- Loosen adjusting screw until throttle valve is fully closed.
- Screw adjusting screw in until throttle just begins to open, then screw in an additional half turn.
- Tighten adjusting screw lock nut.

Reinstall
- Reinstall throttle switch.
- Reinstall throttle body on intake manifold.