Trailer Bulb - Failure Warning Sensor Discontinued

NO.
806

GROUP
38

DATE
3/93

Bulb failure warning sensor for trailer discontinued
850

REFERENCE:
TP 31875/1 (ENGLISH); 05/92; LIGHTING, INSTRUMENTS, AND OTHER ELECTRICAL COMPONENTS

TP 31875/1S (ENGLISH); 09/92; LIGHTING, INSTRUMENTS, AND OTHER ELECTRICAL COMPONENTS

Bulb failure warning sensor for trailer discontinued

The trailer bulb failure warning sensor is mentioned in the Owner's Manual on pages 1:3 and 1:5. If a trailer hitch is to be installed or a customer inquires, inform them that this function has been discontinued.





This affects chassis no. 065000 on, when the cable to terminal 10 on the hazard warning switch is disconnected.

Note:
On earlier produced vehicles, the warning lamp could be disabled by pulling out the hazard switch from the dashboard and cutting the blue wire at the connector pin no. 10. The cut wire should be properly insulated and affixed to the hazard switch wiring harness.