Door - Extended Regulator Channel For Front Side Glass
83volvo02SECTION GROUP NO.
83 3
DATE May, 1983
HE:
Extended Regulator Channel For Front Side Glass
760 GLE
THIS BULLETIN APPLIES TO THE U.S. AND CANADIAN MARKETS.
Longer channels, guide mouldings, and modified plastic water protection panels have been introduced into production at VIN number 16834. All vehicles built prior to this VIN number are to be fitted with these items before sale, or at the next regularly scheduled maintenance interval.
Parts Required Part Number
Channel and Moulding 75990-2
Kit
(1 kit per vehicle required)
Remove:
- door lock knob
- inner door handle
- armrest (disconnect wiring)
- door trim panel
- plastic water deflector
- guide moulding around door frame
Remove lift channel
- Detach clip and lift out channel from regulator mechanism.
Remove the existing guide channel
Remove screws (arrowed) in side of door. (Keep screws to secure new regulator channel).
Install channel and new guide moulding
Align channel and secure it with screws. Install guide moulding. Ensure corner sections are fitted correctly.
Install side glass with channel attached
Check lift mechanism and lock, especially the unlocking mechanism. Adjust if necessary.
Install:
- plastic water deflector
- door trim panel with new clips
- armrest (reconnect wiring)
- inner door handle
- lock knob
When repairs are complete, affix a completion label to the drivers door as illustrated. This will provide a quick reference that the vehicle has been modified.
See Service Manager Bulletin Group 83 No. 1 for detailed information regarding warranty claim preparation and administration.