A/C - ACC Programmers

83volvo02
SECTION GROUP NO.

87 106

DATE October, 1983

RE:

760 A.C.C. Programmers
THIS SERVICE BULLETIN APPLIES TO THE U.S. AND CANADIAN MARKETS.
Under no circumstances should the factory adjusted calibration screw on 760 A.C.C. programmers be altered.

All programmers are factory calibrated and do not need to be altered.

If a problem is encountered with a programmer, it must be returned under warranty. Altering the calibration will not correct any malfunction.

Programmers which have been adjusted by dealers will not be accepted under warranty.