Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Driver Front Airbag Crash Sensor G283







Driver Front Airbag Crash Sensor G283

The general safety precautions for working on airbag, belt tensioner and battery cut-out units (pyrotechnic components) must be observed.

Removing

- Disconnect the vehicle battery.

- Remove the bolt - 3 - (8 Nm).

- Release the connector lock and disconnect the connector - 1 - from the driver front airbag crash sensor (G283) - 2 -.






Installation

- To install, perform the steps used for removal in reverse order.

- Switch the ignition on.

Make sure that no persons are in the vehicle.

- Connect the vehicle battery.