Ignition Coil: Service and Repair

Ignition Coils with Power Output Stages

Special tools, testers and auxiliary items required

• Puller for Ignition Coil (T10095 A)

• Assembly Tool (T10118)

Removing






- Remove the ignition coil wiring harness cover strip.

- Install the assembly tool (T10118) to the release button - arrow - and carefully pull the connector up.






- Slide the puller for ignition coil (T10095 A) on from the straight side of the connector in the - direction of the arrow - and pull out the ignition coil with power output stage.






Installing

- To install, insert the ignition coil with power output stage into the corresponding spark plug shaft so that straight connector sides fit with each other - arrows -.






- Slide on the puller for ignition coil (T10095 A) from the straight side of the connector in the - direction of the arrow - and press the ignition coil with power output stage onto the spark plug.