Backup Light Bulb: Service and Repair

Left and Right Back-Up Lamps

• It is not necessary to remove the tail lamp assembly from the rear lid in order to remove and install the tail lamp.

Removing

- Turn off the ignition and all electrical consumers and remove the key.

- Open the rear lid.

- Unclip the service cover - 1 - from the rear lid trim.






Turn the bulb socket - 1 - in - direction of arrow - and remove it. Pay attention to the wires still connected.






Remove the bulb - 1 - from the bulb socket - 2 - in - direction of arrow -.






Backup lamp bulb: glass base bulb 12V 2HG

Installing

Install in reverse order of removal.