Fuel System Components

Fuel System Components

Note the following whenever working inside the engine compartment due to limited space:

• Route all lines and wires in their original locations.

• Ensure sufficient clearance to all moving or hot components.

• Hose connections are secured with either spring-type or clamp-type clips.

• Fuel hoses at the engine must only be secured with spring-type clips. The use of clamp or screw type clips is not permissible.

• Hose clip pliers (VAS 6340) or spring type clip pliers (VAS 5024 A) are recommended for installing spring-type clips.

• The hose clip pliers (VAS 6362) are recommended for installing space saving clips.