Front Suspension

Front Suspension Overview

• Welding and straightening work on supporting or wheel carrying components of the suspension is not permitted.

• Always replace self-locking nuts.

• Always replace corroded bolts/nuts.

• Bonded rubber bushings can only be turned to a limited extent. Therefore, only tighten bolts on components with bonded rubber bushings when wheel bearing housing is lifted (curb weight position). Refer to => [ Wheel Bearing, Lifting to Curb Weight Position ] Procedures.






I - Refer to => [ Subframe, Stabilizer Bar and Control Arm Assembly Overview ] Front Suspension

II - Refer to => [ Wheel Bearing Assembly Overview ] Wheel Bearing Assembly Overview

III - Refer to => [ Suspension Strut Assembly Overview ] Suspension Strut Assembly Overview

Drive axle overview, refer to => [ Drive Axle Overview ] Drive Axle Overview.