Headlamp Range Control Adjuster (E102) and Instrument Panel Illumination Dimmer Switch (E20)

Headlamp Range Control Adjuster (E102) and Instrument Panel Illumination Dimmer Switch (E20)

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove the driver side storage compartment.

- Reach under the instrument panel and press both locking mechanisms - arrows - together on the adjuster and the switch.






- Push the adjuster and the switch out of the instrument panel.

- Disconnect the connector - 1 - and remove the adjuster and switch.

Installation

Installation is performed in the reverse order of removal.