Right Temperature Door Motor (V159)

Right Temperature Door Motor (V159)

Special tools, testers and auxiliary items required

• Vehicle Diagnostic Tester or newer model.

Removing

- Turn off all electric consumers.

- Switch off the ignition.

- Remove the key.

- Remove the glove compartment.

- Remove the footwell vent on the front passenger side. Refer to => [ Passenger Side Footwell Vent ] Passenger Side Footwell Vent.






- Disconnect the connector from the right temperature door motor.

- Remove the bolt - 1 - to (1.4 Nm) and remove the right temperature door motor.

- Unhook brace - 2 - from right temperature door motor.

Installing

Install in reverse order of removal.

- After installing, function of right temperature door must be checked. Initiate the "basic setting" using the vehicle diagnostic tester.