Shifter A/T: Description and Operation

Selector Mechanism Overview

Move the selector lever into the "P" position and set the parking brake before working with the engine running.






1 Selector Handle with Cover

• Do not remove the handle unnecessarily. For emergency release, only the cover must be removed. Refer to => [ Selector Lever, Manual Release ] Procedures.

• Removing and installing, refer to => [ Selector Lever Handle ] Selector Lever Handle.

2 Clamp

• Always replace.

• For securing the selector handle to the selector lever.

• Attach to the selector handle using hose clamp pliers (V.A.G 1275).

3 Selector Mechanism with Selector Lever Cable

• With integrated selector lever sensor system control module (J587) with selector lever (E313) , Tipronic switch (F189) , selector lever park position lock switch (F319) and selector lever solenoid (N110).

• The selector lever cable can only be replaced together with the selector mechanism. Refer to => [ Selector Mechanism with Selector Lever Cable ] Selector Mechanism with Selector Lever Cable.

• Do not grease the selector lever cable.

• Removing and installing, refer to => [ Selector Mechanism with Selector Lever Cable ] Selector Mechanism with Selector Lever Cable.

• Checking, refer to => [ Selector Lever Cable, Checking ] Testing and Inspection.

• Adjusting, refer to => [ Selector Lever Cable, Adjusting ] Adjustments.

4 Bolt

• 8 Nm

5 Nut

• 8 Nm

• Quantity: 4

6 Selector Housing

• Available only together with the selector mechanism, refer to the Parts Catalog.

7 Bracket

• For the selector lever cable.

8 Selector Lever Cable

• Must not be removed from the selector mechanism and is replaced together as a single component.

9 Transmission

10 Tunnel/Body