Center Radiator

Center Radiator

Special tools, testers and auxiliary items required

• Drip Tray for VAS 6100 (VAS 6208)

• Hose Clip Pliers (VAS 6362)

Removing

- Drain the low temperature coolant circuit. Refer to => [ Draining and Filling, Low Temperature Coolant Circuit ] Draining and Filling, Low Temperature Coolant Circuit.

- Remove the license plate holder - 2 - and the center vent grille - 3 -.






- Remove the coolant hoses - arrows - from the radiator. Remove the retainers - 1 and 2 - and the radiator.






Installing

Installation is carried out in the reverse order while noting the following:

- Fill the low temperature coolant circuit. Refer to => [ Draining and Filling, Low Temperature Coolant Circuit ] Draining and Filling, Low Temperature Coolant Circuit.

• If the radiator was replaced, then it will be necessary to change all the coolant.