Rear Sill Panel Trim

Rear Sill Panel Trim

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove the rear wheel housing trim.

• Vehicles without rear side airbag:=> [ Rear Wheel Housing Trim without Rear Side Airbag ] Rear Wheel Housing Trim without Rear Side Airbag

• Vehicles with rear side bag:=> [ Rear Wheel Housing Trim with Rear Side Airbag ] Rear Wheel Housing Trim with Rear Side Airbag

- Remove the sill panel trim at the rear, from the catches - arrow A -.

- Pull the sill panel trim under the B-pillar trim forward - arrow B -.






Installation

• Before installing, check the mounting elements and replace if necessary.

- Install in reverse order of removal.

- Make sure, that the trim is placed in the in the door seal piping.