Steering Column Switch, through 05.10

Steering Column Switch, through 05.10


The removal and installation of individual steering column switch components must be done in a specified sequence. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.


Always follow the instructions regarding disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

After installing a new Steering Column Electronic Systems Control Module (J527) , it must be coded. Refer to=> [ Steering Column Electronic Systems Control Module (J527), Coding ] Steering Column Electronic Systems Control Module (J527), coding.

If steering column switch malfunctions occur, the coding of the steering column electronics control module (J527) must be checked. Refer to=> [ Steering Column Electronic Systems Control Module (J527), Coding ] Steering Column Electronic Systems Control Module (J527), coding.

Additional information:

• Refer to the Owner's Manual.

DTC Recognition and Display

The Steering Column Electronic Systems Control Module (J527) is equipped with OBD.

Use the Vehicle diagnostic tester under "Guided Fault Finding".