Rear ABS Wheel Speed Sensor, Torsion Beam Axle with Drum Brake

Rear ABS Wheel Speed Sensor, Torsion Beam Axle with Drum Brake

Removing

- Raise the vehicle.

- Release and remove the connector - 1 -.






- Remove bolt - arrow -.






- Remove the rear wheel speed sensor - 1 - from the rear axle.

Installing

Install in reverse order of removal. Note the following:

- Clean the inside of the hole and coat it with hot bolt paste (G 052 112 A3) before installing the rear wheel speed sensor.

- Install the rear wheel speed sensor into the hole in the rear axle and tighten it.

Tightening Specification