AWD

Left Rear Level Control System Sensor G76

• Left rear level control system sensor with adaptive chassis DCC removing and installing, AWD. Refer to => [ Left Rear Level Control System Sensor G76, with Adaptive Chassis DCC ] Left Rear Level Control System Sensor G76, with Adaptive Chassis DCC.

Special tools, testers and auxiliary items required

• Torque Wrench (5-50 Nm) (V.A.G 1331)

Removing

- Disconnect the connector - 1 -.






- Remove the bolts - 2 - from the lower track control arm.

- Remove the bolts - arrows - from the subframe.

- Remove the left rear level control system sensor.

Installing

Install in the reverse order of removal. Note the following:

The left rear level control system sensor lever must points toward the outside of the vehicle.

- Perform a basic setting on the headlamps after replacing the sensor. Refer to the vehicle diagnostic tester.

Tightening Specifications